aerosol

Tinplate, is a tin layer covered in the surface of the sheet, It is a material combining the strength and formability of steel with the corrosion resistance, soldering and aesthetic appearance of tin. Due to the excellent corrosion resistance and anti-corrosion performance, it is widely used in the aerosol can industry. Our company Guangdong Sihai Iron-Printing & Tin-Making Co., Ltd. is a professional factory with 27 years experience, focusing on aerosol top & bottom, printing tinplate, aerosol can of diameter 45/52/57/60/65/70mm. We hope to establish deep partnership with you, please feel free to contact us.

Protection, ventilation, isolation and segregation are extremely important for safe aerosol product storage. We recommend the following tips for aerosol can storage in the workplace: Avoid heat and flame: Do not expose aerosol cans to direct heat sources, open flames, or extreme temperatures. High temperatures can build pressure inside the can, causing it to burst or explode. Aerosol cans should not be stored in hot conditions. Instead, keep them cool and dry, away from direct sunlight and heat sources. High temperatures can change the pressure inside the can, resulting in leaks or explosions. Always use compliant aerosol cans: When storing aerosol can product, you must apply particular engineering controls to prevent the risk of ignition, inadvertent gas release, and projectiles. Keep aerosol cans outdoors. Outdoor storage of aerosols (in compliance cans) is a safer option than indoor storage since any gases scattered can be expelled rather than accumulating indoors. This natural ventilation reduces the risk of human injury, fire, and explosion. Ensure aerosol cans are sheltered from direct sunshine. Direct sunlight and heat can increase your risk, so keep your cages in a safe location away from heat, other dangerous goods, naked fires, ignition sources, and direct sunlight. Beating the Heat with Aerosol Hazards It is important to keep in mind that your activities can affect the safety or danger of aerosol can items. An aerosol can should be handled carefully or disposed of in accordance with local laws if it is broken, dented, or exhibits leaks. Aerosol cans should not be exposed to conditions that could weaken their integrity, such as high temperatures, sources of ignition, physical harm, or other situations.

 Aerosol products now are widely used in homes and workplaces all over the world , such as air freshener, hair spray, shaving foam, cosmetic, insecticide, spray paint and so on.       As the an aerosol product is a mix of substances stored in metal can under pressure, when you press the button at the top of can, it release the substance, we need to use and store them properly, otherwise it will be flammable and combustible.   Tips for usage and storage Safely 1. Use according the instructions on the aerosol products 2. Open the windows and doors if you are using an aerosol product in a room. 3. Never use aerosol product close to your eyes or face, many of the substances are harmful to your eyes or skin. 4. Do not use near fire or open flames, since the aerosol product is mostly flammable. 5. Keep aerosol products in a dry, cool place, far away from the sun or hot place. The pressure inside the can will be increased if overheat, may cause burst and explode. 6. Should put the aerosol products out of the reach of children. 7. When finish using aerosol product, remember to replace the cap and put it to suitable place. 8. When you throw away aerosol product, do not pierce empty cans to compress them, because they still may have some pressure.   Guangdong Sihai Iron-Printing and Tin-Making CO., Ltd is a factory with 24 years for empty aerosol tin can, our products including diameter 45/52/57/60/65/70mm, annual production capacity reach 300million pieces cans. Also we have 2 coating lines with annual output above 16 million sheets, and 27 full-automatic numberical control production lines for aerosol can cone and dome above 300 million sets.