aerosol can cone and dome

 Aerosol products now are widely used in homes and workplaces all over the world , such as air freshener, hair spray, shaving foam, cosmetic, insecticide, spray paint and so on.       As the an aerosol product is a mix of substances stored in metal can under pressure, when you press the button at the top of can, it release the substance, we need to use and store them properly, otherwise it will be flammable and combustible.   Tips for usage and storage Safely 1. Use according the instructions on the aerosol products 2. Open the windows and doors if you are using an aerosol product in a room. 3. Never use aerosol product close to your eyes or face, many of the substances are harmful to your eyes or skin. 4. Do not use near fire or open flames, since the aerosol product is mostly flammable. 5. Keep aerosol products in a dry, cool place, far away from the sun or hot place. The pressure inside the can will be increased if overheat, may cause burst and explode. 6. Should put the aerosol products out of the reach of children. 7. When finish using aerosol product, remember to replace the cap and put it to suitable place. 8. When you throw away aerosol product, do not pierce empty cans to compress them, because they still may have some pressure.   Guangdong Sihai Iron-Printing and Tin-Making CO., Ltd is a factory with 24 years for empty aerosol tin can, our products including diameter 45/52/57/60/65/70mm, annual production capacity reach 300million pieces cans. Also we have 2 coating lines with annual output above 16 million sheets, and 27 full-automatic numberical control production lines for aerosol can cone and dome above 300 million sets.  

Aerosol tin can cone and dome, also calledaerosol tin cantop & bottom or aerosol tin can lids, a aerosol tin can is assembled by aerosol cone, tinplate body and aerosol dome. Guangdong Sihai Iron-Printing and Tin-Making Co., Ltd manufacture aerosol tin can components- aerosol can cone and dome, printed tinplate sheet, we have size diameter 45/52/57/60/65/70mm, and we have high pressure for 45/52/65/70mm. For outside finish, we have clear lacquer, golden lacquer and white coating or customized color, and we can do inner golden coating for diameter 45/52/65mm. Aerosol Tin Can Components Aerosol Can Diameter(mm) Can Components Code Components Φ45 185 Cone 190 Dome Φ52 195 Cone 200 Dome Φ57 201 Cone 203 Dome Φ60 Neck in 205 Cone 206 Dome Φ65 Straight-wall 207.5B Cone 208 Dome Φ65 Necked in 207.5A/B/C Cone 209 Dome Φ65 Straight-wall 211 Cone 211 Dome Φ70 211 Cone 213 Dome For aerosol tin can cone and dome packing, normally we use kraft bag, fixed net and no fumigation wooden pallet to make the cone and dome firm. As the customs has limit for the container gross weight,our standard size is 1.1m length x 1.1m width x 1.1m height to fit the container, 20 pallets/20GP, and 40 pallets/40GP or 40HQ. We can also accept customized packing size or packed in carton, it depends on different sizes and customer’s require.