Aerosol Tinplate Cans

We always prioritize both quality and safety in aerosol packaging. Aerosol cans are widely used in industries for products such as paints, lubricants, cleaners, adhesives, and personal care items. While convenient, they require proper handling to prevent accidents. Potential Hazards of Aerosol Cans Aerosol cans contain compressed gas propellants, making them potentially hazardous if misused. Key risks include: Fire & Explosion – Flammable contents (like solvents or propellants) can ignite if exposed to heat, sparks, or open flames. When atomized, these substances become highly combustible. Pressure-Related Injuries – If punctured, crushed, or overheated, aerosol cans may rupture violently, causing injuries from flying debris or chemical exposure. Toxic Exposure – Some aerosols contain harmful chemicals that can cause respiratory issues or skin irritation if inhaled or sprayed directly on the body. Environmental & Disposal Risks – Improper disposal (e.g., in landfills or incinerators) can lead to leaks, pollution, or compaction hazards. Best Practices for Safe Aerosol Can Use To minimize risks, follow these safety guidelines: 1. Proper Storage Store aerosol cans in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and open flames. Keep them upright to prevent leaks or accidental discharge. Avoid stacking too high to prevent tipping or crushing. 2. Safe Handling & Usage Do not puncture, crush, or incinerate aerosol cans—even empty ones may retain pressure. Use in well-ventilated areas to avoid inhaling fumes. Wear protective gear (gloves, goggles, masks) when handling hazardous aerosols. Never spray toward the face, skin, or ignition sources. 3. Disposal & Recycling Follow local regulations for aerosol can disposal. Empty Tinplate cans can often be recycled with metals—check with your waste management provider. Never dispose of aerosol cans in regular trash if they still contain product.

Guangdong Sihai Iron-Printing And Tin-Making Co.,Ltd (Guangdong Sihai for short) is a factory of producing Diameter 45mm, 52mm, 57mm, 60mm, 65mm, 70mm sizes of Empty Aerosol Tin Cans and Aerosol Cones(Tops) and Domes(Bottoms) and Printed Tinplate Sheets since 1998. Guangdong Sihai factory is not only manufacture and supply various sizes of Aerosol Tinplate Cans, but also Aerosol Components and Printed Tinplate Sheets. You can buy all sets of products you need for aerosol products from Guangdong Sihai factory, which is one stop service and supply. We can manufacture aerosol can lids for diameter 45/52/57/60/65/70mm, with normal and high pressure. Different products use different cone and dome, the cone and dome can do outside clear lacquer/white coating/black coating/red coating. And we can do inner coating for diameter 45/52/65mm, the main products use inner coating is air freshener, deodorant, shaving foam... Also we accept customized lids with your logo or design, just provide your artwork file to us, then we can do printing on it. Beside, we have the special dome for safe vented lid and the blind mark lid. The safe vented lid main use for refrigerant aerosol can, and the blind mark lid for spray paint can. We not only sell aerosol tin can, but also the aerosol cone or dome, welcome to contact us for more details. Key Point: Empty Aerosol Tin Cans is divided into Necked-In and Straight Wall, Normal Pressure and High Pressure type. Aerosol Cones(Tops) and Domes(Bottoms) is divided into Normal Pressure and High Pressure type. Printed Tinplate Sheets is divided into CMYK Printing and PANTONE Printing type. If you want to know more about our company and our products, please feel free to visit our company website and contact us at belows.

Spray Cans refers to a complete pressure packaging container composed of valves, cans and contents (including products, projectiles, etc.). When the valve is opened, the contents are released in a controlled manner at a predetermined pressure. The spray cans has the characteristics of convenient use, good sealing, limited form of contents and safe use. Guangdong Sihai Iron-Printing and Tin-Making Co.,Ltd(Guangdong Sihai for short)was founded in 1998, which has 24 years experiences in producing aerosol tin cans. We can manufacture and sell Diameter 45/52/57/60/65/70mm sizes of empty aerosol tin cans with Necked-In and Strtaight Body types. All the aerosol container need to be with pressure, which shall be with normal pressure and high pressure standard. According to the DOT pressure standard, there will be 2N/2P/2Q Pressure standard. The pressure standard depends on the tinplate thickness of cones and domes, different sizes of aerosol tin cans will be different thickness of tinplate, please see the belows detailed information. 2N/2P Pressure Details Cans Size Thickness Thickness(Cone) Hardness Thickness(Cone) Thickness Thickness(Dome) Hardness Thickness(Dome) Thickness Thickness(Cans Body) Hardness Thickness(Cans Body) Deform Pressure Bursting Pressure D45mm(Necked-In) 0.28mm T3BA/T3CA 0.28mm T4CA 0.20mm T2.5BA/T3BA ≥1.20Mpa ＞1.65Mpa D52mm(Necked-In) 0.28mm T3BA/T3CA 0.28mm T4CA 0.18mm T4CA ≥1.20Mpa ＞1.65Mpa D57mm(Necked-In) 0.28mm T3BA 0.32mm T4CA 0.20mm T3CA ≥1.20Mpa ＞1.65Mpa D60mm(Necked-In) 0.35mm T3BA 0.32mm T4CA 0.19mm T3CA ≥1.20Mpa ＞1.65Mpa D65mm(Necked-In) 0.35mm T3BA 0.35mm T3BA 0.20mm T4CA ≥1.20Mpa ＞1.65Mpa D70mm(Necked-In) 0.40mm T3BA 0.40mm T4CA 0.20mm T4CA ≥1.20Mpa ＞1.65Mpa D65mm(Straight-Body) 0.40mm T3BA 0.40mm T4CA 0.21mm T4CA ≥1.20Mpa ＞1.65Mpa 2Q Pressure Details Cans Size Thickness Thickness(Cone) Hardness Thickness(Cone) Thickness Thickness(Dome) Hardness Thickness(Dome) Thickness Thickness(Cans Body) Hardness Thickness(Cans Body) Deform Pressure Bursting Pressure D45mm(Necked-In) 0.28mm T3BA/T3CA 0.28mm T4CA 0.20mm T3BA ≥1.24Mpa ＞1.86Mpa D52mm(Necked-In) 0.35mm T3BA 0.32mm T4CA 0.20mm T3CA ≥1.24Mpa ＞1.86Mpa D57mm(Necked-In) 0.40mm T3BA 0.35mm T4CA 0.21mm T4CA ≥1.24Mpa ＞1.86Mpa D60mm(Necked-In) 0.40mm T3BA 0.35mm T4CA 0.21mm T4CA ≥1.24Mpa ＞1.86Mpa D65mm(Necked-In) 0.40mm T3BA 0.40mm T3BA 0.21mm T4CA ≥1.24Mpa ＞1.86Mpa D70mm(Necked-In) 0.40mm T3BA 0.40mm T4CA 0.21mm T4CA ≥1.24Mpa ＞1.86Mpa D65mm(Straight-Body) 0.43mm T3BA 0.40mm T4CA 0.21mm T4CA ≥1.24Mpa ＞1.86Mpa 2N:Deform Pressure≥1.00Mpa;Bursting Pressure≥1.45Mpa 2P:Deform Pressure≥1.10Mpa;Bursting Pressure≥1.65Mpa 2Q:Deform Pressure≥1.24Mpa;Bursting Pressure≥1.86Mpa

Nowday, because of the COVID-19 is spreading all over the world, which has seriously affected our life and work, in order to maintain the safety of our living and working, family health and personal protection work are inspareable from the Household Care and Household Hygiene Aerosol Products. The survey results of some research institutions show that many families have the habit of more cleaning and disinfection during the flu season. Therefore, there is no double that all the families must will pay more attention on the Household Care and Household Hygiene Aerosol Products with safety, harmlessness and health during choosing, because these aerosol products will need to be used in indoor, car and other closed spaces. which need to pay more and high and  special attention when using these kinds of aerosol products. Guangdong Sihai Iron-Printing and Tin-Making Co., Ltd(Guangdong Sihai in short) is a factory of producing various sizes of empty aerosol tinplate cans, we can manufacturing Diameter 45/52/57/60/65/70mm cans size, the height range we can make is 95-240mm, we can do the printing as your OEM/ODM designs, you can tell us the requires of your products. For the Household Care and Household Hygiene Aerosol Products, what we see most are the of tinplate cans and aluminum cans these two kinds of material, the personal care products should be used aluminum cans more, but the household care and cleaning should be used tinplate cans more. Diameter 52/65mm sizes of cans should be for Household Care Aerosol Tinplate Cans Usage: Air Freshener Product/Insecticide Product/Hoesehold Cleaning Product etc. Diameter 45/52/65mm sizes of cans should be for personal Care Aerosol Tinplate Cans Usage: Body Spray Product/Personal Caring Product/Sahaving Foam Product etc. If you want to know more about our company and products, please visit our company website and contact us as belows.

Aerosol Cans: Definition: Single-use metal container for aerosol products. When in use, the aerosol product is ejected through the valve and in a controlled form under the pre-pressure. Classification: One-piece can, two-piece can, three-piece can according to structure; Tinplate can, aluminum can, plastic can, glass can according to material; Tinplate cans are divided into straight cans and necked cans according to the shape. Aluminum cans are divided into round shoulder type, oblique shoulder type and stepped shoulder type. Divided into ordinary tanks, high-pressure tanks, and ultra-high-pressure tanks according to pressure requirements. Difference in Material: Aerosol Tinplate Cans also call three-piece can are made by tinplate. Aerosol Aluminum cans also call one-piece can are made by aluminum. Difference in Size: Aerosol Tinplate Cans:Φ45, 52, 57, 65, 70 diameters, with heights ranging from 100mm-300mm. Aerosol Aluminum Cans:Φ22, 25, 28, 35, 38, 40, 45, 50, 53, 55, 59, 66mm, height ranging from 58-240mm. Note: The height of the iron can refers to the height of the can body, excluding the top cover. The height of the aluminum can refers to the total height, from the mouth to the bottom of the can. Difference in Price: The price range of aerosol tinplate cans is 0.08 USD/ PCS to 0.25 USD/ PCS. The price range of aerosol aluminum cans is 0.20 USD/ PCS to 0.50 USD/ PCS. Generally, the price of aerosol aluminum can will be higher than aerosol tinplate can.

Aerosol cans are used to store everything from personal care products to chemical products such as spray paint. While the can itself has the same value as other metal cans, the pressurized air inside and potentially hazardous contents make recycling a bit more complicated. How to recycle aerosol cans correctly becomes an important thing in our daily life. Aerosol Can Recycling Preparation Ensure aerosols are completely empty before recycling. Do your best to use up all the product inside. If the can still has product inside, even if it’s nonhazardous product like whipped cream, your recycling program will not accept it. The easiest way to make sure it’s empty is to shake the can and listen for liquid inside, or spray until nothing comes out. Removed and recycled plastic cap separately. Do not pierce, crush or flatten aerosol cans, and do not puncture a hole in the can to remove any remaining product, as the can will explode and hurt you. Do not attempt to remove the spray nozzle on top of the can. Find a drop-off location for aerosol cans near you using our Recycling Locator. Around 60% of aerosols are made from tinplated steel and approx 40% are made from aluminium. Both of these metals are recyclable. Aerosols also contain some small plastic and rubber components including the lid, valve and dip tube which are extracted in the recycling process.

When it comes to tinplate, the difference between First class and secondary class comes down to surface quality. First class tinplate is designed for direct coating and printing across the entire sheet, with strict limits on defects—no pinholes, no out-of-spec thickness, and no visible dents, wrinkles, or rust that could affect performance. Secondary-class tinplate, on the other hand, allows for minor surface imperfections such as scratches, oil marks, or burrs, which makes it unsuitable for high-quality printing. At Guangdong Sihai, we specialize in manufacturing empty aerosol cans and have done so for 28 years. To ensure the highest level of safety and reliability, we use only first class tinplate for all our aerosol tin cans. This commitment allows us to deliver cans that meet the most demanding standards for coating, printing, and long-term performance. If you have any needs, please feel free to inquiry.

In appearance, Aerosol tinplate canister can be divided into 2 types: Necked-In Aerosol Tinplate Cans and Straight Wall Aerosol Tinplate Cans. The standard control these 2 types can which are made by Guangdong Sihai are as below. Most distinction is the tin thickness. And the pressure is in accordance with national standard. Necked-in aerosol cans are extremly durable and it is the most popular and widely used aerosol tinplate cans. It also the mainly type of aerosol cans produced by Guangdong Sihai. Used to packege from personal care and household to automative aerosol spray products, necked-in aerosol tin cans won a huge market and the supplier faces fierce competition. Diameter 65mm Necked-In Aerosol Tinplate Cans Type:Necked-In Cans Body Thickness:0.20mm Cans Cone Thickness:0.32mm Cans Dome Thickness:0.32mm Deformation Pressure:≥1.35Mpa Bursting Pressure:≥1.50Mpa Srtaight wall aerosol tin cans is normally used for butanne gas can or camping gas can. The design of straight wall is largely adaptive to the gas stove. Now, Guangdong Sihai can supplier 2 types of pressure of straight wall aerosol tinplate cans, normal standard and high pressure can. Certainy, straight wall cans also can be used to pack some car care products like spray paint or automative cleaning products, and it depends on the customer special needs. Diameter 65mm Straight-Wall Aerosol Tinplate Cans Type:Straight-Wall Cans Body Thickness:0.21mm Cans Cone Thickness:0.35mm Cans Dome Thickness:0.32mm Deformation Pressure:≥1.35Mpa Bursting Pressure:≥1.50Mpa All empty aerosol tinplate cans products are manufactured by the standard of GB13042:2008 and ISO901:2008. Guangdong Sihai, as the manufacture over 20 years in aerosol industry, have been working on supplying quality products and service for all clients . Thanks for your reading. If you want to know more detailed information about company and products, please feel free to contact as below.