Small Capacity Empty Tinplate Can in D65mm Used for Air Freshener

Most aerosol cans in the 65mm range are tall. This one is not. With a 100mm height and a high cone profile, the Φ65mm × 100mm can gives you a compact body with a taller top — a combination that changes how the can sits, how it sprays, and how it looks on shelf.

Manufactured by Guangdong Sihai Iron-Printing and Tin-Making Co., Ltd., it sits at the shorter end of our Φ65mm necked-in series (height range 98–300mm).

Why This Can Exists

Q: Why make a 65mm can at only 100mm height?
A: Not every product needs a tall container. A short, wide body gives you a compact can with a large diameter — useful for products where fill volume is moderate but shelf width matters more than height.

Q: What does the high cone change?
A: The high cone raises the top profile of the can. This affects the overall silhouette, the valve and actuator fit, and the way the can presents on shelf. It is often chosen when a specific actuator height or spray geometry is required.

Q: Who typically uses this format?
A:

Can Basics

Q: What are the core specifications?
A:

Q: What heights are available in this series?
A: 98mm to 300mm within the Φ65mm necked-in series.

Q: Is the high cone available in other heights?
A: Yes — cone type can be discussed alongside height selection within the series.

Coating & Finish

Q: Can I choose internal coating?
A: Yes — with or without internal coating, depending on your formulation and protection requirements.

Q: What cone and dome finishes are available?
A: Clear (varnish), white, and gold lacquer. The high cone can be finished in any of these.

Q: Can I combine a high cone with a white finish?
A: Yes — cone type and finish are separate choices and can be combined.

Q: Can I print my own design on the can body?
A: Yes — customized iron-printing is done in-house, covering the full can body with your artwork, colors, and safety markings.

Pressure & Valve

Q: What pressure versions are available?
A: Standard: deformation ≥1.2MPa, bursting ≥1.4MPa. High pressure: deformation ≥1.8MPa, bursting ≥2.0MPa.

Q: Does the high cone affect valve fit?
A: The high cone changes the top profile, which can affect actuator height and spray geometry. Final valve and actuator compatibility should be confirmed against your specific components.

Q: Can I use standard aerosol valves with this can?
A: Yes — the necked-in opening is designed for standard aerosol valves. Valve fit should be verified with your filling line and components.

Applications

Q: Where is this format commonly used?
A:

Production & Quality

Q: What is the production capacity?
A: Cone production runs on 16 fully automatic lines at 320 pcs/min. Dome production runs on 9 fully automatic lines at 900 pcs/min.

Q: How is quality controlled?
A: Production follows the can-making flow: slitting → welding → drying → can sealing → leak testing → packaging. All products are manufactured under ISO9001:2015 and GB13042-2008, supported by an independent laboratory and in-house mold development.

[Factory Image Placeholder]
Insert: Factory exterior
Insert: Fully automated aerosol can production line
Insert: Iron-printing workshop
Insert: Independent laboratory

Ordering

Q: How is the can packaged for shipment?
A: Pallets or cartons, planned to match your container loading and handling requirements.

Q: What is the delivery time?
A: Lead time depends on order quantity and customization. Short and on-time delivery is supported by automated production lines.

Q: What should I prepare before sending an inquiry?
A: Please prepare the following:

• Can size and height, or target fill volume

• Estimated order quantity

• Cone type preference (high cone / standard cone)

• Internal coating preference (with or without)

• Cone and dome finish (clear varnish / white / gold lacquer)

• Pressure version (standard or high)

• Artwork files or design references

• Packaging preference (pallets or cartons)

• Destination and delivery requirements

Q: Can I request samples?
A: Yes — sampling can be arranged before mass production.